Rosewill RNX-N400LX Manuale Utente

Wireless Router

RNX-N400LX User Manual

2.4GHz(B+G+N)

Mode

Click to select:

Client

WDS

AP+WDS wireless mode. (WDS Security Setting in 3.8)

** Please note change mode will result in around 1~3 minutes delay of

internet connection due to system reboot and internet re-connects.

Network Type

While Mode is selected to be Client. Click to select the network type
infrastructure or Ad hoc.

SSID

It is the wireless network name. The SSID can be 32 bytes long.

Channel Width

Select the operating channel width 20 MHz or 40 MHz.

[N band only]

Control

Sideband

Select the Sideband with Upper or Lower for channel
width 40MHz.

[N band only]

Channel Number

Select the wireless communication channel from pull down menu.

Broadcast SSID

Click to enable or disable the SSID broadcast function.

WMM

Click Enabled/Disabled to enable WMM feature.

Data Rate

Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 1M to 54Mbps or MCS.

Associated

Clients

Click the Show Active Clients button to open Active Wireless Client
Table that shows the MAC address, transmit-packet, receive-packet
and transmission-rate for each associated wireless client.

Enable Mac

Clone (Single

Ethernet Client)

Take Laptop NIC MAC address as wireless client
MAC address. [Client Mode only]

SSID of

Extended

Click to enable Universal Repeater Mode

Interface

Assign SSID when enables Universal Repeater Mode.

Apply Changes

Click the Apply Changes button to complete the new configuration
setting.

Reset

Click the Reset button to abort change and recover the previous
configuration setting.

3.32 Wireless – Advanced Setting

These settings are for technically advanced users who have a sufficient knowledge about

wireless LAN. These settings should not be changed unless you know what effect the

changes will have on your RNX-N400LX.