Rosewill RNX-N400LX Manuale Utente

implemented to close the PPPoE connection while there are no data 
sent out longer than the idle time set. 
 
Manual  connection type means to setup the connection through the 
PPPoE protocol by clicking the Connect  button manually, and 
clicking the Disconnect button manually. 

If you select the PPPoE and Connect on Demand connection type, 
fill in the idle time for auto-disconnect function. Value can be 
between 1 and 1000 minutes. 

Fill in the mtu size of MTU Size. The default value is 1400. 

Click to select getting DNS address for DHCP support. 
Please select Set DNS Manually if the DHCP support is selected. 

Click to select getting DNS address for DHCP support. 

Fill in the IP address of Domain Name Server 1. 

Fill in the IP address of Domain Name Server 2. 

Fill in the IP address of Domain Name Server 3. 

Fill in the MAC address that is the MAC address to be cloned. 

Click the checkbox to enable uPNP function. 

Click the checkbox to enable IGMP Proxy. 

Click the checkbox to enable WAN ICMP response. 

Click the checkbox to enable web configuration from WAN side. 

Click the checkbox to enable IPSec packet pass through. 

Click the checkbox to enable PPTP packet pass through. 

Click the checkbox to enable L2TP packet pass through. 

Click the Apply Changes button to complete the new configuration 
setting. 

Click the Reset button to abort change and recover the previous 
configuration setting. 

 

 

36