Rosewill RNX-N150RT Manuale Utente

 

-4- 

Industry Canada statement: 

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the 

following two conditions:   

(1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation. 

This equipment complies with IC radiation exposure limits set forth for an uncontrolled 

environment. This equipment should be installed and operated with minimum distance 20cm 

between the radiator & your body.   

This device has been designed to operate with an antenna having a maximum gain of 2 dBi. 

Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The 

required antenna impedance is 50 ohms. 

•  Place connecting cables carefully so that no one will step on them or stumble over them. 

•  Always disconnect all cables from this device before servicing or disassembling. 

•  Use ONLY an appropriate power adaptor or cord for your device. 

•  Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North 

America or 230V AC in Europe). 

•  Do not allow anything to rest on the power adaptor or cord and do not place the product where 

anyone can walk on the power adaptor or cord. 

•  Do not use the device if the power adaptor or cord is damaged as it might cause electrocution.   

•  If the power adaptor or cord is damaged, remove it from the power outlet. 

•  Do not attempt to repair the power adaptor or cord. Contact your local vendor to order a new 

one. 

•  Do not use the device outside, and make sure all the connections are indoors.