Rosewill RNX-N150RT Manuale Utente

 

- 41 - 

Internet connection to remain active at all times, enter “0” in the Max Idle Time field. 

Otherwise, enter the number of minutes you want to have elapsed before your Internet 

connection terminates. 

¾

 

Connect Automatically - Connect automatically after the Router is disconnected. To use this 

option, check the radio button. 

¾

 

Connect Manually - You can configure the Router to make it connect or disconnect manually. 

After a specified period of inactivity (Max Idle Time), the Router will disconnect from your 

Internet connection, and you will not be able to re-establish your connection automatically as 

soon as you attempt to access the Internet again. To use this option, click the radio button. If 

you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time 

field. Otherwise, enter the number in minutes that you wish to have the Internet connecting 

last unless a new link is requested. 

)

Caution: Sometimes the connection cannot be terminated although you specify a time to 

Max Idle Time because some applications are visiting the Internet continually in the 

background. 

Click the Save button to save your settings. 

)

If you don't know how to choose the appropriate connection type, click the Detect button to 

allow the Router to automatically search your Internet connection for servers and protocols. 

The connection type will be reported when an active Internet service is successfully detected 

by the Router. This report is for your reference only. To make sure the connection type your 

ISP provides, please refer to the ISP. The various types of Internet connections that the 

Router can detect are as follows: 

z

 

PPPoE - Connections which use PPPoE that requires a user name and password.   

z

 

Dynamic IP - Connections which use dynamic IP address assignment.   

z

 

Static IP - Connections which use static IP address assignment. 

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses 
one of these protocols, then you must configure your connection manually.