TP-LINK 1910010885 Manuale Utente
TD-W8970B
300Mbps Wireless N Gigabit ADSL2+ Modem Router (Annex B) User Guide
50
passphrase. The modem router is configured by this security type by default.
•
Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
the drop-down list. The default setting is Auto, which can select WPA-PSK
the drop-down list. The default setting is Auto, which can select WPA-PSK
or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
•
Encryption: You can select Auto, TKIP or AES as Encryption.
•
Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-35.
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-35.
•
Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
should be 30 or above. Enter 0 to disable the update.
¾
WPA/WPA2 – Enterprise: It’s based on Radius Server.
•
Authentication Type: Authentication Type: You can choose the type for the
WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can
select WPA-PSK
WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can
select WPA-PSK
or WPA2-PSK authentication type automatically based on the wireless
station's capability and request.
•
Encryption: You can select Auto, TKIP or AES as Encryption.
•
RADIUS Server IP: Enter the IP address of the Radius Server.
•
RADIUS Server Port: Enter the port that radius service used.
•
RADIUS Server Password: Enter the password for the Radius Server.
•
Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
should be 30 or above. Enter 0 to disable the update.
¾
WEP: It is based on the IEEE 802.11 standard.
•
Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
the drop-down list. The default setting is Auto, which can select WPA-PSK
the drop-down list. The default setting is Auto, which can select WPA-PSK
or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
•
WEP Key Format:
Hexadecimal and
ASCII formats are provided here
.
Hexadecimal