Avocent Cyclades-PR2000 Manuale Utente

Unnumbered
Interfaces

Point-to-Point

Connection

A

B

E

F

FIGURE 9.2  STATIC ROUTING EXAMPLE 2

Figure 9.2 shows another static routing example to explain the 

Gateway or Interface parameter.  Between the two

routers is a point-to-point connection.  Another network could be created, but is not necessary.  Both routers can
be assigned unnumbered interfaces, because everything that leaves one router is sent to the other.

To define static routes, enter the menu CONFIG =>STATIC ROUTES =>IP =>ADD ROUTE.  A description of the
parameters in this menu, with the configuration for Router 1 in the examples above, is given in the table that
follows.