Atlantis Land 111U Manuale Utente

 

 

48 

(PPPoE only) Type the name of your PPPoE service here.

Enter the user name exactly as your ISP assigned. If assigned a 

name in the form user@domain where domain identifies a service 

name, then enter both components exactly as given. 

A static IP address is a fixed IP that your ISP gives you. A dynamic 

IP address is not fixed; the ISP assigns you a different one each 

time you connect to the Internet. The Single User Account feature 

can be used with either a dynamic or static IP address. 

Select Obtain an IP Address Automatically if you have a dynamic IP 

address; otherwise select Static IP Address and type your ISP 

assigned IP address in the IP Address field below. 

Select the method of multiplexing used by your ISP from the drop-

down list. Choices are VC or LLC. 

 

Select Always ON Connection when you want your connection up 

all the time. The ADSL Router will try to bring up the connection 

automatically if it is disconnected. 

Connect on demand is dependent on the traffic. If there is no 

traffic (or Idle) for a pre-specified period of time), the connenct will 

tear down automatically. And once there is traffic send or receive, 

the connection will be automatically on. Please insert the Idle Time 

in minute. 

 

The IP address can be either dynamically (via DHCP) or given IP 

address provide by your ISP. For Static IP, you need to specify the 

IP address, Subnet Mask and Gateway IP address. 

You must specify a Router IP address.

Enter a subnet mask in dotted decimal notation. 

Refer to the Subnetting appendix in the to calculate a subnet mask 

If you are implementing subnetting. 

You must specify a gateway IP address.

Select this option to Activate/Deactivated the NAT (Network