Atlantis Land 111U Manuale Utente

 

 

92 

2 

Make sure that there is not an console session running. 

3 

Check that you have enabled web service access. If you have 

configured a secured client IP address, your computer’s IP address 

must match it. Refer to the chapter on remote management for 

details. 

4 

For WAN access, you must configure remote management to allow 

server access from the Wan (or all). 

5 

Your computer’s and the ADSL Router’s IP addresses must be on the 

same subnet for LAN access. 

6 

If you changed the ADSL Router’s LAN IP address, then enter the 

new one as the URL. 

7 

Remove any filters in LAN or WAN that block web service.

8 

See also Section A.9.

 

The web configurator does not display properly. 

1 

Make sure you are using Internet Explorer 5.0 and later versions.

2 

Delete the temporary web files and log in again. 

In Internet Explorer, click Tools, Internet Options and then click the 

Delete Files ... button. 

When a Delete Files window displays, select Delete all offline 

content and click OK. (Steps may vary depending on the version of 

your Internet browser.) 

I forgot my login username and/or password. 

1 

If you have changed the password and have now forgotten it, you 

will need to upload the default configuration file. This will erase all 

custom configurations and restore all of the factory defaults 

including the password. 

2 

Press the RESET button for five seconds, and then release it. When 

the SYS LED begins to blink, the defaults have been restored and 

the ADSL Router restarts. Or refer to the Resetting the ADSL Router