Atlantis Land A02-RA2 ME01 Manuale Utente
29
The User Password Configuration page allows the user to set the password for the user.
Miscellaneous Configuration
The Miscellaneous Configuration allows users to set all the miscellaneous configurations.
HTTP Server Access: This field allows the user to configure the Web pages can be accessed
from:
from:
All: When this field is checked, it allows both WAN and LAN access to the Web
pages.
pages.
Restricted LAN: This field allows the Web pages access from LAN side.
Restricted WAN Specified IP & Subnet Mask: This field allows the Web access from
WAN side with a specify IP and subnet mask.
WAN side with a specify IP and subnet mask.
HTTP Server Port: This field allows the user to specify the port of the Web access.
For example, when it is changed to 1001, the HTTP server address for the LAN side is
For example, when it is changed to 1001, the HTTP server address for the LAN side is
http://192.168.1254:1001
.
FTP server: This field allows the user to enable or disable the FTP connection.
TFTP server: This field allows the user to enable or disable the TFTP connection.
DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an external
network, in order to provide an additional layer of security. When there is a suspected packet
coming from WAN, the firewall will forward this packet to the DMZ host.
DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an external
network, in order to provide an additional layer of security. When there is a suspected packet
coming from WAN, the firewall will forward this packet to the DMZ host.
DMZ Host IP: The IP address of the DMZ host at LAN side.
DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to the DHCP
server runs on WAN side. To have this function working properly, please disable the NAT to
run on router mode only, disable the DHCP server on the LAN port, and make sure the
routing table has the correct routing entry.
DHCP Target IP: The DHCP server runs on WAN side.
IGMP Proxy: Here is the global setting for IGMP Proxy. If it is enabled, then the
enabled IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can
have IGMP Proxy working on it.
IGMP Proxy: Here is the global setting for IGMP Proxy. If it is enabled, then the
enabled IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can
have IGMP Proxy working on it.
PPP reconnect on WAN access: If it is enabled, the PPP session will be automatically
established when there is a packet wants to go out the WAN.
established when there is a packet wants to go out the WAN.
Q: What is the difference between PPP reconnect on WAN access and the Automatic Reconnect?
A: Some ISPs terminated the PPP session due to the inactivity.