Avaya X330W2-DS1 Manuale Utente

Layer 3 CLI Commands

Avaya X330W-2DS1 User’s Guide

89

Use the

 router ospf command to enable OSPF protocol on the system and to 

enter the Router Configuration context. . The

 no form of this command disables it 

globally. The default is disabled.

The syntax for this command is:

Use the

 router rip command to enable the Routing Information Protocol (RIP) 

and to emter tje Router Configuration context. The

 no form of this command 

disables RIP. The default state is disabled.

The syntax for this command is:
[no] router rip

Example:
To enable the RIP protocol: 

X330WAN-2DS1-1(configure)# router rip

X330WAN-2DS1-1(configure)#

 router: rip #

Use the

 router vrrp command to enable VRRP routing globally. Use the no 

form of this command to disable VRRP routing.

You cannot activate both VRRP and SRRP protocols at the same time.

The syntax for this command is:
[no] router vrrp

Use the

 show ip arp command to display the Address Resolution Protocol 

(ARP) cache.

The syntax for this command is:
show ip arp  [<interface>| <IP interface> | <ip addr> [<ip mask>] | static]

interface

String up to 32 characters