Avaya X330W2-DS1 Manuale Utente
Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide
97
The syntax for this command is:
show ip route static
[<ip addr> [<mask>] ]
Examples:
Output Example:
Router-1 (super)# show ip route static
X330WAN-2DS1-1(super router:ospf)# show ip route static
Router-1 (super)# show ip route static
X330WAN-2DS1-1(super router:ospf)# show ip route static
Showing 1 rows
Network Mask Interface Next-Hop Cost Pref Perm Active
--------------- ---- -------------------- --------------- ---- ---- ---- ----
0.0.0.0 0 FastEth 1 149.49.75.1 1 low No Yes
Network Mask Interface Next-Hop Cost Pref Perm Active
--------------- ---- -------------------- --------------- ---- ---- ---- ----
0.0.0.0 0 FastEth 1 149.49.75.1 1 low No Yes
show ip route summary
Use the show ip route summary command to display the number of routes
known to the device.
known to the device.
The syntax for this command is:
show ip route summary
Output Example:
X330WAN-2DS1-1(super router:ospf)# show ip route summary
X330WAN-2DS1-1(super)# show ip route summary
Route Source Networks Subnets
---------------- ---------------- ----------------
Local 0 1
Static 0 1
Total 0 2
X330WAN-2DS1-1(super)# show ip route summary
Route Source Networks Subnets
---------------- ---------------- ----------------
Local 0 1
Static 0 1
Total 0 2
Use the
show ip vrrp command to display VRRP information.
ip-address
The IP address of the routes
mask
The ip mask of the routes
show ip route static
Display all static routes
show ip route static 137.32.50.13
Display a single static route
show ip route static 137.44.50.13 255.255.255.0
Display range of static routes