Avaya X330W2-DS1 Manuale Utente
Policy CLI Commands
Avaya X330W-2DS1 User’s Guide
101
Policy CLI Commands
This section contains a list of all Policy related CLI commands.
ip access-default-action
Use the ip access-default-action command to set the default action for a
specific policy list.
specific policy list.
The syntax for this command is:
ip access-default-action
<policy-list-number> <default-
action>
Example:
X330WAN-2DS1-1
ip access-default-action 101 default-action-
deny
ip access-group
Use the ip access-group command to activate a specific policy list and
direction. To suspend the policy list, use the no version of this command.
direction. To suspend the policy list, use the no version of this command.
Note:
This command can only be executed from inside the interface context, such as:
the Serial, Loopback, Fast Ethernet and Fabric Fast Ethernet interfaces of the
X330WAN.
X330WAN.
The syntax for this command is:
[no] ip access-group
<policy-list-number> <direction>
Example:
X330WAN-2DS1-1(config-if:FastEthernet1)# ip access-group 110
policy-list-number
An integer (100..199), or for the X330WAN
(100..149) where 0 is the default list.
(100..149) where 0 is the default list.
default-action
default-action-deny|default-action-permit
policy-list-number
An integer (100..149) where 0 is the default list.
direction
in|out