Avaya X330W2-DS1 Manuale Utente

WAN CLI Commands

Avaya X330W-2DS1 User’s Guide

131

Example:
X330WAN-2DS1-1(config-controller:1)# no framing

Use the interface Console command to enter Console interface (Interface 
Console context) to PPP configure mode. For LAN interfaces, use this command to 
create the interface. Use the no form of this command to set the default Console 
parameters.

The syntax for this command is:
[no] interface Console

Example:

X330WAN-2DS1-1(configure)# interface Console

Use the interface FabricFastEthernet command to create and/or enter 
Interface Fabric Fast Ethernet configuration mode (context). For LAN interfaces, use 
this command to create the interface. Use the no form of this command to delete a 
Fabric Fast Ethernet interface or an IP interface.

The syntax for this command is:
[no] interface FabricFastEthernet 

[port[:vlan[.ip-interface]]]

Example:
To enter Interface Fabric Fast Ethernet context for port 1, vlan 1, with an IP-interface 
of 1:

interface FabricFastEthernet 1:1.1

Examples:

X330WAN-2DS1-1(configure)# interface FabricFastEthernet 1

port

An integer with a value of 1.

vlan

The 802.1q Fabric number. An integer between integer 1 and 
3071.

ip-interface

The IP interface number within this interface (as a number of IP 
interfaces might be bound to an L3 interface). An integer 
between 0 and 1024.