Avaya X330W2-DS1 Manuale Utente
General: Device Commands
Avaya X330W-2DS1 User’s Guide
47
General: Device Commands
This section contains a list of all general device CLI commands.
clear screen
The clear screen command clears the current terminal display.
The syntax for this command is:
clear screen
clear snmp trap
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
receiver table.
The syntax for this command is:
clear snmp trap
{<rcvr_addr>|all}
Output Example:
X330WAN-2DS1-1(super)# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
X330WAN-2DS1-1(super)# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
clear timezone
Returns the timezone to its default, Coordinated Universal Time (UTC).
The syntax for this command is:
clear timezone
copy running-config startup-config
Use the copy running-config startup-config command to copy the
device configuration from the current RAM Running Configuration to the Startup
Configuration NVRAM.
device configuration from the current RAM Running Configuration to the Startup
Configuration NVRAM.
The syntax for this command is:
copy running-config startup-config
rcvr_addr
IP address or IP alias of the trap receiver (the SNMP management
station) to clear
station) to clear
all
Keyword that specifies every entry in the SNMP trap receiver table