Avaya X330W2-DS1 Manuale Utente

Layer 3 CLI Commands

Avaya X330W-2DS1 User’s Guide

65

Router-N(configure)# no arp timeout

Use the 

clear arp-cache command to delete all dynamic entries from the ARP 

cache and the IP route cache. 

The syntax for this command is:

[<vlan>|<ip addr>[<mask>]]

Examples:

clear arp-cache                   

                Flush all ARP entries.

clear arp-cache marketing_vlan    

                Flush ARP entries for a VLAN.

clear arp-cache 30    

                                           Flush ARP entries for a VLAN ID.

clear arp-cache 192.168.0.0 255.255.0.0  

Flush  range  of  ARP  entries  belonging        

                                              to one subnet.

Use the 

clear ip route command to delete all the dynamic routing entries from 

the Routing Table.

The syntax for this command is:

 * | <ip-addr> [<ip-mask>]

Examples:

clear ip route *                             

Clears all the routing table.

clear ip route 192.168.49.1 255.255.255.0    

Clears a range of entries.

Use the

 default-metric command to set the interface RIP route metric value. 

The 

no form of this command restores the default value (1).

vlan

VLAN string (up to 16 characters) or VLAN ID 
number

ip addr

IP address

mask

IP mask

ip-addr

IP address

ip-mask

IP mask address