Avaya X330W2-DS1 Manuale Utente

Chapter 7

X330WAN CLI Commands

68

Avaya X330W-2DS1 User’s Guide

Use the

 ip admin-state command to set the administrative state of an IP 

interface. The default state is up.

The syntax for this command is:
ip admin-state <up/down>

Use the 

ip bootp-dhcp network command to select the network from which 

the bootp/dhcp server shall allocate an address. This command is required only 
when there are multiple interfaces over the Fabric. The

 no form of this command 

restores to the default.

This command is executed from the Fast Ethernet and Fabric Fast Ethernet 

interfaces.

The syntax for this command is:
[no] ip bootp-dhcp network <ip net>

Example:
To select the network 192.168.169.0 as the network from which an address shall be 
allocated for bootp/dhcp requests:

X330WAN-2DS1-1(configure)# ip bootp-dhcp network 192.168.169.0

Use the 

ip bootp-dhcp relay command to enable relaying of bootp and dhcp 

requests to the bootp/dhcp server. The 

no form of this command disables bootp/

dhcp relay. The default state is: disabled.

The syntax for this command is:
[no] ip bootp-dhcp relay

up/down

Administrative state of the interface. The choices are 
up

 (active) or down (inactive).

ip net

The IP subnet