ZyXEL Communications NBG-419N Manuale Utente
Chapter 10 WISP Mode
NBG-419N v2 User’s Guide
82
10.5.1 Static WEP
Use this screen if the access point to which you want to connect to uses WEP security mode.
Figure 59
WEP (WISP)
The following table describes the labels in this screen..
Table 37
WEP (WISP)
LABEL
DESCRIPTION
Wireless Setup
Network Name
(SSID)
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security Mode
Select Static WEP to enable data encryption.
PassPhrase
Enter a Passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is further converted by
the Router into a complicated string that is referred to as the “key”. This key is requested
from all devices wishing to connect to a wireless network.
the Router into a complicated string that is referred to as the “key”. This key is requested
from all devices wishing to connect to a wireless network.
WEP Encryption
Select 64-bit WEP or 128-bit WEP.
This dictates the length of the security key that the network is going to use.
Authentication
Method
Method
Select Auto or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to login to the
wireless client. Keep this setting at Auto unless you want to force a key verification before
communication between the wireless client and the Router occurs.
wireless client. Keep this setting at Auto unless you want to force a key verification before
communication between the wireless client and the Router occurs.
Select Shared Key to force the clients to provide the WEP key prior to communication.
ASCII
Select this option in order to enter ASCII characters as WEP key.