ZyXEL Communications 782M Manuale Utente
P782M G.SHDSL Bridge
Figure 5-1 Example of Traffic Shaping
5.2 TCP/IP
Configuration
The following sections describe how to configure the TCP/IP parameters of a remote node.
5.2.1 Editing TCP/IP Options
Follow the steps ahead to edit Menu 11.6 — Remote Node ATM Layer Options.
In menu 11.1, make sure the Edit ATM Options field is set to Yes and then press [ENTER] to display
Menu 11.6 — Remote Node ATM Layer Options (shown next).
Menu 11.6 — Remote Node ATM Layer Options (shown next).
Only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 0
to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).
to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).
5-2
Remote Node TCP/IP Configuration