ZyXEL Communications 782M Manuale Utente
P782M G.SHDSL Bridge
7-6
System Information and Diagnosis
7.4 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Access can be by
Telnet or by a serial connection to the console port, although some commands are only available with a
serial connection. See the included disk or the zyxel.com web site for more detailed information on CI
commands.
functionality as the SMT, while adding some low-level setup and diagnostic functions. Access can be by
Telnet or by a serial connection to the console port, although some commands are only available with a
serial connection. See the included disk or the zyxel.com web site for more detailed information on CI
commands.
Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by typing help or
? at the command prompt. Type “exit” to return to the SMT main menu when finished.
? at the command prompt. Type “exit” to return to the SMT main menu when finished.
Figure 7-7 Command Mode in Menu 24
Figure 7-8 Valid Commands
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
8. Command Interpreter Mode
Enter Menu Selection Number:
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
sys exit device ether
wan poe xdsl atm
fpga ip ppp bridge
hdap
emitest>