ZyXEL Communications 782M Manuale Utente

 

 

P782M G.SHDSL Bridge 

Menu 24.7.1 - System Maintenance - Upload System Firmware 

To upload the system firmware, follow the procedure below: 

  1. Launch the FTP client on your workstation. 

  2. Type "open" and the IP address of your system. Then type "root" and 

     SMT password as requested. 

  3. Type "put firmwarefilename ras" where "firmwarefilename" is the name 

     of your firmware upgrade file on your workstation and "ras" is the 

     remote file name on the system. 
  4. The system reboots automatically after a successful firmware upload. 

For details on FTP commands, please consult the documentation of your FTP 

client program. For details on uploading system firmware using TFTP (note 

that you must remain on this menu to upload system firmware using TFTP), 
please see your manual. 

Press ENTER to Exit: 

 

You see the following screen when you telnet into menu 24.7.2. 

Menu 24.7.2 - System Maintenance - Upload System Configuration File 

To upload the system configuration file, follow the procedure below: 

  1. Launch the FTP client on your workstation. 

  2. Type "open" and the IP address of your system. Then type "root" and 

     SMT password as requested. 

  3. Type "put configurationfilename rom-0" where "configurationfilename" 

     is the name of your system configuration file on your workstation, which 
     will be transferred to the "rom-0" file on the system. 

  4. The system reboots automatically after the upload system configuration 

     file process is complete. 

For details on FTP commands, please consult the documentation of your FTP 
client program. For details on uploading system firmware using TFTP (note 

that you must remain on this menu to upload system firmware using TFTP), 

please see your manual. 

Press ENTER to Exit: 

 

Firmware and Configuration File Maintenance   

8-11