ZyXEL Communications 5 Series Manuale Utente
Chapter 12 Wireless Screens
ZyWALL 5/35/70 Series User’s Guide
238
12.2.4 IEEE 802.1x + Dynamic WEP
Click WIRELESS > Wi-Fi > Wireless Card to display the Wireless Card screen. Select
802.1x + Dynamic WEP from the Security list.
802.1x + Dynamic WEP from the Security list.
Figure 134 WIRELESS > Wi-Fi > Wireless Card: 802.1x + Dynamic WEP
The following wireless LAN security fields become available when you select 802.1x +
Dynamic WEP in the Security drop down list-box.
Dynamic WEP in the Security drop down list-box.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 61 WIRELESS > Wi-Fi > Wireless Card: WPA (continued)
LABEL
DESCRIPTION
Table 62 WIRELESS > Wi-Fi > Wireless Card: 802.1x + Dynamic WEP
LABEL
DESCRIPTION
Security
Select 802.1x + Dynamic WEP from the drop-down list.
ReAuthentication
Timer (Seconds)
Timer (Seconds)
Specify how often wireless stations have to resend user names and passwords in
order to stay connected. Enter a time interval between 10 and 65535 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
order to stay connected. Enter a time interval between 10 and 65535 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wireless
network after a period of inactivity. The wireless station needs to send the
username and password again before it can use the wireless network again. Some
wireless clients may prompt users for a username and password; other clients may
use saved login credentials. In either case, there is usually a short delay while the
wireless client logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless station is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.
network after a period of inactivity. The wireless station needs to send the
username and password again before it can use the wireless network again. Some
wireless clients may prompt users for a username and password; other clients may
use saved login credentials. In either case, there is usually a short delay while the
wireless client logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless station is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.