Gefen EXT-HDKVM-LAN Manuale Utente
page | 14
Displaying the IP Address
If the IP address(es) of a Sender and/or Receiver unit are not known, then use the following
procedure to display the IP address of any Sender or Receiver unit on the network.
1. Press and release the
Switch button on the front panel of the Receiver unit.
The current video channel will be displayed in the top-left corner of the screen.
In the example, above, the current video channel is set to 0.
2. Change the video channel number by pressing and releasing the
Switch button to
advance to the next video channel. Video channel numbers range from 0 to 255.
Consecutively pressing the
Switch button will cycle through all 256 channels.
Channel: 00
Press the
Switch button
Operating the HD KVM over IP
Basic Operation