Gefen EXT-DVI-444DL Manuale Utente

PANEL DESCRIPTIONS

Display 1 Selected Source LED

The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 1 will be indicated by an
active LED.

Display 2 Selected Source LED

The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 2 will be indicated by an
active LED.

Display 3 Selected Source LED

The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 3 will be indicated by an
active LED.

Display 4 Selected Source LED

The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 4 will be indicated by an
active LED.

IR Receiver

This IR receiver will receive commands from the included RMT-16-IR remote control.

IR Extension Port

Connect an optional IR extension (part# EXT-RMT-EXTIR) to this port.

Power LED Indicator

This LED will become active once the included 5V DC power adapter is properly connected.

RS-232 Serial Control Interface

Use the commands on page 10 to control the 4x4 DVI DL Matrix using the RS-232 interface.

DVI Input 1

Connect a DVI DL source to this input.

DVI Input 2

Connect a DVI DL source to this input.

DVI Input 3

Connect a DVI DL source to this input.

DVI Input 4

Connect a DVI DL source to this input.

DVI Output 1

Connect a DVI DL display to this port.

DVI Output 2

Connect a DVI DL display to this port.

DVI Output 3

Connect a DVI DL display to this port.

DVI Output 4

Connect a DVI DL display to this port.

Locking 5V DC Power Adapter Input

Connect the included 5V DC power adapter to this port.