Gefen EXT-COMPAUD-CAT5-444 Manuale Utente

Connect the included jumper cables between the Component With Audio 
Outputs (Item 5 on this page) and these inputs. Inputs include component video, 
analog audio, and digital audio connectors. There are 4 inputs that are used in 
conjunction with the CAT-5 output ports for extension.

Connect IR emitters/blaster (sold separately, part# EXT-2IREMIT) to these 
output ports. Each output is linked to one of the extension receivers. IR 
information is relayed from each remote location and is sent to these blasters for 
control of local equipment from the extended location. Place the blaster “eye” on 
or near the IR receiver of the connected equipment.

Connect user supplied CAT-5e cables between these ports and the 4x4 
Component Audio Over CAT-5 Receivers at remote locations. These cables 
will transmit the component and audio signals to the remote locations while 
receiving IR data from each receiver.

This port is used for control of the 4x4 Component Audio Over CAT-5 by RS-232 
serial communication. Please see page 14 for more information.

Connect the included jumper cables between the Component With Audio 
Extension inputs (Item 1 on this page) and these inputs. Outputs include 
component video, analog audio, and digital audio connectors. There are 4 
outputs.

Connect the component video and audio source devices to these input ports 
using the supplied component and audio cables. Up to 4 sources can be 
connected at one time. Inputs include component video, analog audio, and 
digital coaxial connectors.

Connect the included 24V DC power supply to this input.