GE GFK-1004B Manuale Utente
5
5-36
TCP/IP Ethernet Communications User’s Manual – January 1996
GFK-1004B
TALLY Command
The TALLY command has the form:
TALLY <task(s)>
where <task(s)> is one or more task identification letters from Table 5-3
This command causes the current value of the tallies for the specified task or tasks to be
displayed. Some of these tallies simply indicate load and performance information
about the station. Others can indicate whether or not there are problems either within
the station or within the network. See Chapter 5, Troubleshooting, for more information
on using the tallies to help isolate and resolve problems.
displayed. Some of these tallies simply indicate load and performance information
about the station. Others can indicate whether or not there are problems either within
the station or within the network. See Chapter 5, Troubleshooting, for more information
on using the tallies to help isolate and resolve problems.
An example TALLY command is shown below:
> tally c
<<< PLC Driver Tallies >>>
PlcQFull = 0000H PlcSweep = 03c9H MsgRcv = 0038H PLCReq = 001aH
PlcAbt = 0000H MsgSent = 0036H MyAbt = 0000H Write = 0023H
Read = 0010H Timeout = 0000H Regs = 0400H AnInput = 0040H
AnOutput = 0040H uCode = 0300H
Table 5-11. PLC Driver Tallies (Tally c)
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Tally
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Meaning
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
PlcQFull
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times a request of the PLC was retried be-
cause of congestion in the PLC.
cause of congestion in the PLC.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
PlcSweep
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of executive windows received by the Ethernet
Interface.
Interface.
ÁÁÁÁÁÁÁ
MsgRcv
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of messages received from the CPU.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
PlcReq
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of COMMREQs received from the application
program.
program.
ÁÁÁÁÁÁÁ
PlcAbt
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times the CPU aborted a data transfer.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
MsgSent
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of messages sent to the CPU.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
MyAbt
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times the Ethernet Interface aborted a data
transfer.
transfer.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Write
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times the Ethernet Interface successfully
wrote to the PLC memory.
wrote to the PLC memory.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Read
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times the Ethernet Interface successfully read
from the PLC memory.
from the PLC memory.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Timeout
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Count of the number of times the Ethernet Interface timed out wait-
ing for a response from the CPU.
ing for a response from the CPU.
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
uCode
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
The microcode revision level of the firmware in the CPU.