ZyXEL Communications 202 Manuale Utente

ZyXEL M-202 User’s Guide

Chapter 1 Getting Started

23

After you install the ZyXEL Utility and then insert the ZyXEL M-202, follow the steps below 
to connect to a network using the Site Survey screen.

1 Make sure a wireless network is available and within range.

2 Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next.

3 Click Scan to search for available wireless networks.

Figure 5   ZyXEL Utility: Site Survey 

4 To join a network, either click an SSID in the table and then click Connect or double-

click an SSID. 

5 If the wireless security is activated for the selected wireless network, the Security 

Settings screen displays. This screen varies according to the network’s encryption 
method. Configure the same security settings as the associated network.

Note: If the selected network is unavailable or security settings are not correct, the 

ZyXEL M-202 will be disconnected.

Figure 6   ZyXEL Utility: Security Settings