ZyXEL Communications 1000 Manuale Utente

 Chapter 26 SSL VPN

ZyWALL USG 1000 User’s Guide

on your network for full tunnel mode access, enter access messages or upload a 
custom logo to be displayed on the remote user screen. 

Figure 347   VPN > SSL VPN > Global Setting 

The following table describes the labels in this screen. 

Table 129   VPN > SSL VPN > Global Setting

Global Setting
Network 
Extension Local 
IP

Specify the IP address of the ZyWALL (or a gateway device) for full 
tunnel mode SSL VPN access. 

Leave this field to the default settings unless it conflicts with another 
interface. 

SSL VPN Login 
Domain Name
SSL VPN Login 
Domain Name 
1/2

Specify a domain name for users to use for SSL VPN login. The domain 
name must be registered to one of the ZyWALL’s IP addresses or be one 
of the ZyWALL’s DDNS entries. You can specify up to two domain names 
so you could use one domain name for each of two WAN ports. Do not 
include the host. For example, www.zyxel.com is a fully qualified 
domain name where “www” is the host; so you would just use 
“zyxel.com”.

The ZyWALL displays the normal login screen without the button for 
logging into the Web Configurator.

Message
Login Message

Specify a message to display on the screen when a user logs in and an 
SSL VPN connection is established successfully. You can enter up to 60 
characters (“a-z”, A-Z”, “0-9”) with spaces allowed.