Technicolor - Thomson 210i Manuale Utente

♦ 

Dial-In Service – Click Enable to allow dial-in service. Note that if you click 
Disable, the router will not accept any in-coming ISDN calls. 

♦ 

Dial-In PPP Authentication – There are two choices: 

   PAP - Selecting this option will force the router to authenticate dial-in 

users with the PAP protocol. 

   PAP or CHAP - Selecting this option means the router will attempt to 

authenticate dial-in users with the CHAP protocol first. If the dial-in user 
does not support this protocol, it will fall back to use the PAP protocol for 
authentication. 

♦ 

Mutual Authentication (PAP) – Enable this only if the connecting router 
requires mutual authentication. By default, the option is set to No. 

♦ 

Username – Enter the mutual Authentication username. 

♦ 

Password – Enter the mutual Authentication password. 

♦ 

Start IP Address – Enter a start IP address to be assigned to the dial-in PPP 
connection. You should choose an IP address from the local private network. 
For example, if the local private network is 192.168.1.0/255.255.255.0, you 
can choose 192.168.1.200 to be the Start IP Address. Because one ISDN 
BRI has two independent data channels (B-channels), it is possible to allow 
two dial-in users at the same time. The first dial-in user would be assigned the 
start IP address and the second would be assigned the start IP address plus 1. 
Click OK. 

After activating the dial-in capability, you must create an access account for each dial-in 
user. From the Advanced Setup menu, click Remote Dial-In User Setup to open the 
page shown below. The router provides 10 access accounts for dial-in users.