Alcatel Carrier Internetworking Solutions Switch/Router Manuale Utente
Replacing a File on the Secondary MPX
Page 6-12
Replacing a File on the Secondary MPX
The
mpmreplace
command replaces a file on the secondary
MPX
. It works like a combination
of
mpmrm
, which is described in Removing a File from the Secondary MPX on page 6-13, and
mpmstore
, which is described in Transferring a File to the Secondary MPX on page 6-11. To
use this command, enter
mpmreplace
, followed by a space, a slash (
/
), the name of the flash
directory, another slash (
/
), and the name of the file you want to replace.
For example, to replace the file
mpm.log
on the secondary
MPX
with the file
mpm.log
from the
/flash
directory on the primary
MPX
, for example, you would enter
mpmreplace /flash/mpm.log
at the system prompt. The following will be displayed.
Deleting.
Transferring
Transferring
If the file already exists on the target
MPX
and it is identical to the one you are transferring,
something similar to the following message.
File mpm.log is identical on Primary and Secondary 2
If the files are identical, the
mpmreplace
command will terminate and the file will not be
replaced.
Loading a File from the Secondary MPX
The
mpmload
command loads a file from the flash memory of the secondary
MPX
into the
flash memory of the primary
MPX
. To use this command, enter
mpmload
, followed by a space,
a slash (
/
), the name of the flash directory, another slash (
/
), and the name of the file you
want to load.
For example, to load the file
mpm.log
from the
/flash
directory on the secondary
MPX
into the
primary
MPX
, for example, you would enter
mpmload /flash/mpm.log
at the system prompt.