Alcatel Carrier Internetworking Solutions Switch/Router Manuale Utente
Configuring SNMP Parameters and Traps
Page 13-7
Please note that any additional
NMS
entries must have a unique
IP
address. Repeat steps b
through f to continue configuring additional
NMS
entries. Once you save your configura-
tion and re-enter the
snmpc
command at the prompt, the screen refreshes to include the
new
NMS
entry. The following is a sample display:
SNMP current configuration:
1)
Process SNMP Packets - enabled
2)
Utilization Threshold
- 60%
3)
Set Community Name
- public
4)
Get Community Name
- public
5)
Trap Community Name - public
6)
Broadcast Traps
- disabled
7)
1 Unicast Traps
- enabled
8) NMS IP address
- 123.12.1.1
/162 -- ffffffff:bfffffff (on) (SA
-- ffffffff:fffffffff)
9)
NMS IP address
- 123.22.2.2
/162 -- ffffffff:ffffffff (on)
-- ffffffff:fffffffff
(save/quit/cancel)
:
g. To delete an IP address added to this list, enter the NMS index number of the entry
followed by the decimal (
.
) character. The following example would delete the NMS IP
address listed at number
9
.
9=.