NEC 151944 Manuale Utente
ND-46550
(E)
CHAPTER
2
Page 7
Revision 2.0
PN-DAIC (DAIC Card)
Digital Interface Channel Expansion Card.
This card provides the 1.5Mbps (24 channel) digital interface.
1 through 6 DAIC cards can be provided at main site.
In Remote PIM, 2 DAIC cards can be provided.
Small Platform PIM: up to 64 line/trunks can be accommodated.
1000 IVS PIM: up to 47 line/trunks can be accommodated.
This card provides the 1.5Mbps (24 channel) digital interface.
1 through 6 DAIC cards can be provided at main site.
In Remote PIM, 2 DAIC cards can be provided.
Small Platform PIM: up to 64 line/trunks can be accommodated.
1000 IVS PIM: up to 47 line/trunks can be accommodated.
PN-BS00/BS01 (BUS interface Card) BUS interface cards for PIM0 or PIM1 through PIM7
For Remote PIM System, BS00 card is required at the main site, even if
the system is 1-PIM configuration.
the system is 1-PIM configuration.
PN-CP01 (FP Card)
Firmware processor card
For Remote PIM System, CP01 card must be mounted on PIM0 at the
main site, even if the system is 1-PIM configuration.
main site, even if the system is 1-PIM configuration.
RMT PCM-0.3 CA
1 ft. (30 cm) PCM signal cable
This cable is used for connection between DAIA card and BUS interface
card.
card.
17-TW-0.3 CONN CA-A
1 ft. (30 cm) connection cable between DAIA cards
This cable is required when plural DAIA cards are mounted in a PIM at
the main site.
the main site.
48-TW-0.2 CONN CA
1ft. (30 cm) connection cable.
This cable is used for connecting between DAIA card and DAIC card or
DAIB card and DAIC card.
DAIB card and DAIC card.
Table 2-2 Required Equipment (Continued)
EQUIPMENT NAME
DESCRIPTION