Panasonic UB-5338C Manuale Utente

Daily Care and Maintenance

When the clock battery has been drained, the time set-
up screen is displayed each time the unit’s power is
turned on.
Replace the battery as follows and set the current time
(see page 26).

Loosen the screw attached to the lower side of
the Control Panel

1, then remove the battery

holder

Note
• Do not loosen any other screws.

Remove the old battery and install the new one
with the positive (“+”) terminal upward.
• Always use “CR2032” batteries and be sure

that the battery is inserted as indicated on the
battery holder.

Set the battery holder with the battery side
upward and retighten the screw in step 1.

Set the current time. (See page 26.)

Note

• Dispose of expired battery quickly, by covering the

terminals in tape and following the disposal
regulations in your country/area.

Replacing the Battery for the
unit clock

Screw

CR2032

Old battery

New battery

This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material -
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate

For U.S.A

Após o uso as pilhas / baterias
contidas neste produto poderão
ser dispostas em lixo doméstico.

For Brazil

For Netherlands

Bij dit produkt zijn batterijen geleverd. Wanneer
deze leeg ziju, moet u ze niet weggooien maar
inleveren als KCA.

For Taiwan ( 台灣 )

UB5838C-PJQXC0259ZA_mst.book 30 ページ２００９年５月２６日　火曜日　午後２時５９分