Lg Electronics 55WV70MS Manuale Utente

Your Monitor set supports the Plug & Play* feature.

* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.

y

y

Connect the signal
input cable and tighten
it by turning the screws
clockwise.

Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Select RGB input.

y

y

It is recommended to use the Monitor set
with the HDMI connection for the best image
quality.

y

y

To comply with the specifications of the
product, use a shielded interface cable with
ferrite core, such as D-sub 15 pin cable and
DVI/HDMI cable provided with the product.

y

y

If you turn the Monitor set on when the set
becomes cold, the screen may flicker. This
is normal.

y

y

Some red, green, or blue spots may appear
on the screen. This is normal.

y

y

Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.

y

y

Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.

y

y

Use the standard Macintosh

adapter since an incompatible
adapter  is  available  in  the
market.  (Different  signaling
system)

y

y

Apple computers may require an adapter to
connect to this monitor. Call or visit their web
site for more information.

PC

Back of the product.

Macintosh Adapter
(not included)

(not included)

PC/MAC