Lg Electronics 55WV70MS Manuale Utente

Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of networks may require the display net-
work settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet pro-
vider or router manual.

To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),

1

 Press

MENU to access the main menus.

2

 Press the Navigation buttons to scroll to

and press

.

3

 Press the Navigation buttons to select

and press

.

4

 If you already set Network Setting, select

. The new connection settings resets

the current network settings.

5

 Select

or

.

- If selecting

, press the

Navigation and Number buttons. IP address-
es will need to be input manually.

-

: Select this if there is a

DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.

6

 When you are finished, press

.

LAN

Router

LAN

WAN

Cable modem

ETHERNET

Internet

Internet

Cable modem

Router

y

y

Network setting menu will not be availa-
ble until the display connected to physical
network.

y

y

Since there are various connection meth-
ods, please follow the specifications of
your telecommunication carrier or internet
service provider.

y

y

Do not connect a modular phone cable to
the LAN port.

y

y

Since there are various connection meth-
ods, please follow the specifications of
your telecommunication carrier or internet
service provider.