Lg Electronics 42SH7DB Manuale Utente

7

 

y

Wireless networks can be subject to interfer-
ence from other devices operating at a fre-
quency of 2.4 GHz (wireless phones, Bluetooth 
devices, or microwave ovens). There may also 
be interference from devices with a frequency 
of 5 GHz, same as other Wi-Fi devices.

 

y

The surrounding wireless environment can 
cause the wireless network service to run 
slowly.

 

y

For an AP connection, an access point device 
that supports wireless connection is required 
and the wireless connection feature must be 
enabled on the device. Contact your service 
provider regarding availability of wireless con-
nection on your access point.

 

y

Check the SSID and security settings of the AP 
for AP connection. Refer to the appropriate 
documentation for SSID and security settings 
of the AP.

 

y

Invalid settings on network devices (wired/
wireless line sharer, hub) can cause the 
monitor to run slowly or not operate properly. 
Install the devices correctly according to the 
appropriate manual and set the network.

 

y

Connection method may differ according to 
the AP manufacturer.

 •

Do not turn the display off or remove a USB 
storage device while  MY MEDIA menu is 
activated, as this could result in loss of files or 
damage to the USB storage device.

 •

Back up your files saved on a USB storage device 
frequently, as you may lose or damage the files 
and this may be not covered by the warranty.

or

Connect USB storage devices such as a USB flash 
memory, external hard drive to the display and use 
multimedia features.
Connect a USB flash memory or USB memory card 
reader to the Display as shown on the following 
illustration. The My Media screen appears.

1

 

Press SETTINGS to access the main menus.

2

  Press the navigation buttons to scroll to  

NETWORK and press OK.

3

  Press the navigation buttons to select  

Network Status.

4

 Press 

OK to check the network status.

5

  When you are finished, press EXIT.

Return to the network setting menu.

Test the current network status after 
setting the network.

Return to the previous menu.