Lg Electronics MFL67652408 Istruzione Sull'Installazione

y

y

Check the wall materials and the thickness of finishing materials.

y

y

 You can use the anchors and bolts provided with the Laser Display set for walls 

made from concrete, lightweight concrete, soft fieldstone, hard fieldstone, brick 

or cellular blocks.

y

y

When installing it on a wall not specified in this manual, make sure each fixing 

point withstands an uplifting load of 70 kgf (686 N) and a shearing load of 100 

kgf (980 N) or more. 

(Attach a plate such as plywood to strengthen the wall before installation.)

a.  At each anchor position, use a 8 mm drill bit to make a hole with a depth of  

80 mm - 100 mm.

b. Clean the holes.
c.  Insert the anchors provided into each hole.  

(Use a hammer when inserting the anchor.)

d.  Fix a part in place by aligning it with the screw hole. 

Tighten the screw with a torque 45 kgf/cm - 60 kgf/cm or higher.

a

b

c

d

Anchor

Fixing ring and space steel