Canon SX80 MarK II Manuale Utente

107

Setting Up Functions fr

om 
Menu

s

Setting for Slideshow (SX80 II)

[Slideshow interval]

You can project the images stored in a 
PictBridge-compatible device (

) or a 

USB flash memory (

) in the slide-

show.

Use [<] / [>] to set the interval (minutes: 
seconds) of projection (60 minutes = max-
imum).
Set [-- : --] if no slideshow is performed.
When the setting is completed, press the 
MENU button.

• [-- : --] is the factory default.
• The maximum length of slideshow time 

is 60 minutes (60:00).

• Use the USB file browser for the projec-

tion from the USB flash memory. For 
more details, refer to the page 

.

Setting up the Remote Control Channel 

[Other settings] - [Remote control]

You can set different channels to different 
remote controls, if you use two projectors 
at the same time.

Press the OK button to accept your setting 
and then press the MENU button.

• The factory defaults is [Ch1] for both 

projector and remote control.

• After changing the channel on the 

menu, be sure to change the channel of 
the remote control, too.

Selecting a Channel on the Remote Con-
trol
You can change the channel on the 
remote control as follows:

HDMI

COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC

USB

Slideshow interval

System settings

HDMI

COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC

USB

Ch1

Select the channel of the remote control 
used for this projector, and press the OK 
button.

Ch2

Ch1

Press the OK button and [ ] for 3 sec-
onds at the same time.

Ch2

Press the OK button and [>] for 3 sec-
onds at the same time.

Other settings

System settings

Remote control

<