Benq MX661 Manuale Utente

Operation

60

i. You can select Video or Graphic display mode. Graphic Mode: worse image 

quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.

ii. You can select whether to activate compatible mode.
iii.  You can select whether to automatically open the Q Presenter application when 

the computer is powered on.

iv. When you install the Q Presenter, the program will automatically identify the 

language of your computer’s operating system and install the same language as 
your operating system. If your language isn’t included, the system will keep 
English as the default setting.

v. You can link to the BenQ remote network operation page on page 

.

This function is designed to ensure network display through the correct projector. To 

toggle this function:

1.

Go to the SYSTEM SETUP: Advanced > Network Settings menu after 
opening the OSD menu system. Press MODE/ENTER.

2.

Press  

to 

highlight 

Projection Log In Code and press 

/

 to select On or 

Off.

When this function is on, the projector 

generates a random 4-digit code in the 

upper right corner when you switch the 

source to Network Display. You need 

to key in this 4-digit code in the Q 

Presenter when connecting to the 

projector.