Benq SP840 Manuale Utente

Operation

34

The projector is preset with several predefined picture 

modes so that you can choose one to suit your operating 

environment and input signal picture type.
To select an operation mode that suits your need, you 

can follow one of the following steps.
• Press MODE/ENTER on the projector repeatedly 

until your desired mode is selected.

• Go  t

o  t

he PICTURE: Basic > Picture Mode menu 

and press  /  to select a desired mode.

The picture modes available for different types of signals are listed below.
1.

: Is appropriate for playing colorful movies, video clips from digital 

cameras or DVs through the COMPUTER input for best viewing in a blackened (little 

light) environment.

2.

: Maximizes the brightness of the projected image. This mode is 

suitable for environments where extra-high brightness is required, such as using the 

projector in well lit rooms.

3.

 

Is appropriate for viewing colorful movies, video clips 

from digital cameras or DVs.

4.

: Recalls the settings customized based on the current 

available picture modes. See 

details.

There are three user-definable modes if the current available picture modes are not suitable 

for your need. You can use one of the picture modes (except the User 1/User 2/User 3) as a 

starting point and customize the settings.
1.

Press MENU/EXIT to open the On-Screen Display (OSD) menu.

2.

Go to the PICTURE: Basic > Picture Mode menu.

3.

Press /

 to select User 1 to User 2/User 3.

4.

Press   to highlight Reference Mode.

5.

Press  /  to select a picture mode that is closest to your need.

6.

Press   to select a sub-menu item to be changed and adjust the value with  / . 

See 

 

below for details.

7.

When all settings have been done, highlight Save Settings and press MODE/ENTER 

to store the settings.

8.

The confirmation message 'Setting Saved' displays.