Benq SP840 Manuale Utente

Operation

46

The On-Screen Display (OSD) menus can be set according to your preferences. The 

following settings do not affect the projection settings, operation, or performance. 
• Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets the 

length of time the OSD will remain active after your last key press. The time length 
ranges from 5 to 30 seconds in 5-second increments. Use  /  to select a suitable time 

frame.

• Menu position in the SYSTEM SETUP: Basic > Menu Settings menu sets the OSD 

position in five locations. Use  /  to select a preferred position.

• Language in the SYSTEM SETUP: Basic menu sets your familiar language for the 

OSD menus. Use  /  to select your language. 

• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be 

displayed during projector start-up. Use  /  to select a screen.

1.

Press POWER and a confirmation 

message displays prompting you. If you 

don’t respond in a few seconds, the 

message will disappear.

If you want to cancel the message, press 
any key except PAGE  /  and 
LASER

 on the remote control. Or you 

can press 

 on the projector 

and a warning message appears. Press 

 again. 

2.

Once the cooling process finishes, the 
POWER indicator light 

is a steady 

orange and fans stop.

3.

Disconnect the power cord from the 

wall socket if the projector will not be 

used in an extended period of time.