Benq MP576 Manuale Utente
Operation
49
Description of each menu
Function
(Default setting/value)
Description
Wall Color
(Off)
Corrects the projected picture's color when the projection
surface is not white. See
details.
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio
for details.
Keystone
(0)
Corrects any keystoning of the image. See
Position
(0)
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you
made until they reach their maximum or minimum.
This function is only available when a PC signal (analog
RGB) is selected.
RGB) is selected.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when a
PC signal (analog RGB) is selected.
PC signal (analog RGB) is selected.
H. Size
(0)
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog
RGB) is selected.
RGB) is selected.
Digital Zoom
(1.0X)
Magnifies or reduces the projected image. See
for details.
Picture Mode
(Presentation)
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
for details.
Reference Mode
(Dynamic)
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
for details.
Brightness
(50)
for details.
Contrast
(0)
Adjusts the degree of difference between dark and light in the
image. See
for details.
1. DISPLAY
menu
2. PICTUR
E
menu