Sanyo PLC-XF60 Manuale Utente

Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered. 

Hot air is exhausted from the exhaust vent.  When using or
installing the projector, the following precautions should be
taken. 
–  Do not put any flammable objects near the vent.
–  Keep the exhaust vent at least 3’(1m) away from any

objects.

–  Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part.  This area will become
hot while the projector is being used.

–  Do not put anything on the cabinet.  The materials put on

the cabinet will not only get damaged but also cause fire
hazard by heat.

Cooling fans are provided to cool down the projector.  This
projector monitors internal temperature and control the
running speed of the cooling fans.  

Air Intake Vent

Exhaust Vent
(Hot air exhaust)

Do not tilt the projector more than 20

degrees above and below. 

In upward projection, do not tilt the

projector over 20 degrees right and

left.

Do not put the projector on either

side to project an image. 

20˚

20˚

In downward projection, do not tilt

the projector over 20 degrees right

and left.

Use the projector properly in specified positions.  Improper
positioning may reduce the lamp life and result in severe
accident or fire hazard.
This projector is allowed to project the picture in any position
of 360 degrees such as upward, downward, or backward as
below.

When installing the projector, avoid positioning it as

described below: