Sanyo PLC-XU106K Manuale Utente
1
TO MAINTAIN THE LIFE OF THE LAMP,
ONCE YOU TURN THE PROJECTOR
ON, WAIT AT LEAST FIVE MINUTES
BEFORE TURNING IT OFF.
ONCE YOU TURN THE PROJECTOR
ON, WAIT AT LEAST FIVE MINUTES
BEFORE TURNING IT OFF.
Power off? disappears after 4 seconds.
Turning Off the Projector
Press the ON/STAND-BY button on the top control or
on the remote control, and Power off? appears on the
screen.
on the remote control, and Power off? appears on the
screen.
Press the ON/STAND-BY button again to turn off the
projector. The POWER indicator starts to blink red, and
the cooling fans keep running. (You can select the level
of fans’ quietness and speed. See “Fan” on page 57.)
At this time, you can unplug the AC power cord even if
the fans are still running.
projector. The POWER indicator starts to blink red, and
the cooling fans keep running. (You can select the level
of fans’ quietness and speed. See “Fan” on page 57.)
At this time, you can unplug the AC power cord even if
the fans are still running.
1
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
POWER indicator stops blinking and you can turn on
the projector.
Note:
• When the On start function is set to On, the projector will
be turned on automatically by connecting the AC power
cord to an AC outlet. (p. 53)
cord to an AC outlet. (p. 53)
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING indicator blinks or lights red, see
“WARNING indicator” on page 60.
• While the POWER indicator is blinking, the lamp is being
cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.
until the POWER indicator stops blinking to turn on the
projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.
off.
DO NOT OPERATE THE PROJECTOR
C ON TIN U OU SLY WITH OU T R ES T.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN
OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24
HOURS.
C ON TIN U OU SLY WITH OU T R ES T.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN
OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24
HOURS.
Basic Operation