Sanyo PLC-XU106K Manuale Utente

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC
adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format
and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are
shown on pages 72.)

One of the following messages may appear when:

The  projector  cannot  recognize  the  connected
signal  conforming  to  the  provided  PC  Systems.
Auto is displayed on the System Menu box and
the Auto PC adjustment function works to display
proper  images.  If  the  image  is  not  projected
properly,  a  manual  adjustment  is  required.
(pp.33-34)

There  is  no  signal  input  from  the  computer.
Check  the  connection  between  your  computer
and  the  projector.    (See  “Troubleshooting”  on
page 66.)

The  preset  system  is  manually  adjusted  in  the
PC  adjust  Menu.  The  adjusted  data  can  be
stored in Mode 1-5. (pp.33-34)

PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually.

Press the MENU button to display the On-Screen
Menu. Use the Point

▲▼

buttons to select Input and

then press the Point

►

or the SELECT button.

Use the Point

▲▼

buttons to select System and then

press the Point

►

or the SELECT button.

Use the Point

▲▼

buttons to select the desired system

and then press the SELECT button.

The PC System Menu Selected
system is displayed.

Systems in this
dialog box
can be selected.

Customized Mode 
(1–5) set in the
PC adjust Menu
(pp.33-34).