Sanyo PLC-XU106K Manuale Utente

The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.

When  the  temperature  inside  the  projector  reaches  a
certain level, the projector will be automatically shut down to
protect  the  inside  of  the  projector. The  POWER  indicator  is
blinking while the projector is being cooled down. When the
projector  has  cooled  down  enough  (to  its  normal  operating
temperature), it can be turned on again by pressing the ON/
STAND-BY button.

When the projector detects an abnormal condition, it is
automatically shut down to protect the inside of the projector
and the WARNING indicator lights red. In this case, unplug
the AC power cord and reconnect it, and then turn the
projector on once again to verify operation. If the projector
cannot be turned on and the WARNING indicator still lights
red, unplug the AC power cord and contact the service
station.

CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.

Note:

   The  WARNING  indicator  continues  to  blink  even  after

the  temperature  inside  the  projector  returns  to  normal.
When  the  projector  is  turned  on  again,  the  WARNING
indicator stops blinking.

– Did  you  provide  appropriate  space  for  the  projector  to  be

ventilated?  Check  the  installing  condition  to  see  if  the  air
vents of the projector are not blocked.

– Has the projector been installed near an Air-Conditioning/

Heating  Duct  or  Vent?  Move  the  installation  of  the
projector away from the duct or vent.

– Is the filter clean? Clean the filter periodically.

WARNING emit a
red light

WARNING  blinking
red