Sanyo PLC-WL2500 Manuale Utente

Auto PC adjustment function is provided to automatically adjust

Fine sync, Total dots, Horizontal , Vertical 

and

Clamp position to conform to your computer.

The adjusted parameters from the Auto PC adjustment can

be stored in the projector. Once the parameters are stored,

the setting can be done just by selecting a

Mode (1-10) in

the PC System Menu (see page 29). See also “Store” on

page 32.



  • 

Fine sync, Total dots, Horizontal and Vertical 

position of some computers can not be fully adjusted

with the Auto PC adjustment function. When the image

is not provided properly with this operation, manual

adjustments are required (pp.31-32).

 • The Auto PC adjustment can not be operated when

480i, 575i, 480p, 575p, 720p, 105i or 1080i is selected

in the PC System Menu (p.29) , or when the signal is

coming from the HDMI terminal.

Press the MENU button to display the On-Screen

Menu. Use the Point

▲▼

buttons to select

PC adjust 

and then press the Point

►

or the SELECT button.

Use the Point

▲▼

buttons to select

Auto PC adj . and

then press the SELECT button.

Use Point ▲▼

buttons

to select

adj . and press the SELECT button.

Please wait . . . appears while the Auto PC

adjustment is in process.