Sanyo PLC-WL2500 Manuale Utente

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens

cleaner, or use a lens cleaning paper or commercially

available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents, or other harsh chemicals might scratch

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth.

When the cabinet is heavily soiled, use a small amount of

mild detergent and finish with a soft dry cleaning cloth. Avoid

using an excessive amount of cleaner. Abrasive cleaners,

solvents, or other harsh chemicals might scratch the surface

of the cabinet.

When the projector is not in use, put the projector in

an appropriate carrying case to protect it from dust and

scratches.

Do not use any flammable solvents or air sprays

on the projector and in its vicinity. The explosion

or fire hazard may occur even after the AC power

cord is unplugged because the temperature inside

the projector is extremely high due to the lamps. In

addition, there is a risk that the internal parts may

be damaged not only by the flammable air spray but

also by the cold air.

When moving the projector or while it is not in use, replace

the lens cover.

Thread the string through the hole on the lens cover

and then tie a knot in the string to secure it in place.

To pass the other end of the string into the hole on the

top of the projector and pull at it.