Sanyo PLC-WXU700 Manuale Utente

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the

remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the

remote control.

Before  using  these  buttons,  correct  input  source  should  be  selected  through  Menu  operation  as  described

below.

Use the Point

▲▼

buttons to select Computer 1 and

then press the Point

►

button; use the Point

▲▼

buttons to select HDMI, and then press the SELECT

button.

When the input source is coming from video

equipment connected to the COMPUTER

IN 1/COMPONENT IN terminal with a

Component-VGA Cable, select Component.

When the input source is coming from video

equipment connected to the COMPUTER

IN 1/COMPONENT IN terminal with a Scart-

VGA Cable, select RGB (Scart).

Press the MENU button to display the On-Screen

Menu. Use the Point

▲▼

buttons to select Input and

then press the Point

►

or the SELECT button.

Note:

 • Network is for the Network function. See the owner’s

manual of “Network Set-up and Operation” .

 • When the Input Search function is set to On1 or On,

the input signal will be searched automatically (p.48).

When Computer 1 is selected, use the Point

▲▼

buttons to select Component or RGB(Scart) and then

press the SELECT button.



When  the  video  signal  is  connected  to  the

HDMI terminal, select HDMI.



 

can not be selected when using the COMPUTER IN 2/

MONITOR OUT terminal as MONITOR OUT output.