Sanyo PLC-XD2600 Manuale Utente

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC

Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format

and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are

shown on page 71.)

One of the following messages may appear when:

When the projector cannot recognize the

connected signal conforming to the provided
PC systems,

 

Auto is displayed on the System

Menu box and the Auto PC Adjustment function

works to display proper images. If the image is

not projected properly, a manual adjustment is

required (pp.30-31).
There is no signal input from the computer.

Check the connection between your computer

and the projector. (See “Troubleshooting” on

p.64.)

The preset system is manually adjusted in the

PC adjust Menu. The adjusted data can be

stored in

Mode 1–10 (pp.30-31).

PC Systems provided in this projector is chosen.

The projector chooses a proper system provided

in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually.

Press the MENU button to display the On-Screen

Menu. Use the Point

▲▼

buttons to select

Input and

then press the Point

►

or the SELECT button.

Use the Point

▲▼

buttons to select

System and then

press the Point

►

or the SELECT button.

Use the Point

▲▼

buttons to select the desired system

and then press the SELECT button.

►

►

Computer 1                                        RGB
Computer 2                                        RGB 
Video                                                                                    

System    

 

 

 

 

         XGA 1

The PC System Menu

Selected system is

displayed.

Systems in this dialog box

can be selected.

Customized

(1–10) set in the

PC adjust Menu

(pp.30-31).