Sharp XG-C435X Manuale Utente

9

9

9

9

9 DHCP Client Setting

Select “On” for “DHCP Client”, then press 

ENTER

.

“Obtaining IP Address...” appears, then the menu
screen appears. Confirm the parameters of IP
Address, Subnet Mask and Gateway on the TCP/IP
screen.
If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the
item 0.)

Selectable items
On

Off

Description

Obtains configuration parameters for
TCP/IP network automatically.
Sets the TCP/IP manually.

0

0

0

0

0 TCP/IP Setting

Enter “IP Address” using '

'

'

'

', "

"

"

"

", |

|

|

|

|

and \, then press 

Enter “Subnet Mask” using '

'

'

'

', "

"

"

"

",

|

|

|

|

| and \, then press  ENTER.

Enter “Gateway” using '

'

'

'

', "

"

"

"

", |

|

|

|

| and

\, then press  ENTER.

Selectable items
IP Address

Subnet Mask

Gateway

Description

Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as
that of the computer and equipment on
the network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
  “000. 000. 000. 000”.

Note

• Confirm the existing network’s segment (IP ad-

dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If “192.168.150.002”
is not used in a network with an IP address of
“192.168.150.XXX”, you don’t have to change
the projector IP address.

• For details about each setting, consult your

network administrator.